You are here: Home / PCM / n-Octadecane, 99.5+% / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with TA DSC2500
By: Fraunhofer ISE
Additional Comments
  • Heating rate: 1.0 [K/min]
  • Cooling rate: 1.0 [K/min]
  • Sample mass: 7.74 [mg]
  • Heat of fusion: 240.0 [kJ/kg] - deviation: 0.1 [kJ/kg]
    • Integration range, lower limit: 15.0 [°C]
    • Integration range, upper limit: 32.5 [°C]
    • Onset temperature: 27.67 [°C] - deviation: 0.01 [°C]
    • Offset temperature: 30.39 [°C] - deviation: 0.06 [°C]
  • Crystallization enthalpy: 240.7 [kJ/kg] - deviation: 0.3 [kJ/kg]
    • Integration range, lower limit: 15.0 [°C]
    • Integration range, upper limit: 27.5 [°C]
    • Onset: 25.7 [°C] - deviation: 0.8 [°C]
    • Offset: 24.7 [°C] - deviation: 0.3 [°C]
Enthalpy (T)

Set 1/ db-materials-heating_cooling_measurements

Heating - Fraunhofer_ISE_Octadecane_99p5_Sample2_Cycle1_1K_min_Heating.dat

Cooling - Fraunhofer_ISE_Octadecane_99p5_Sample2_Cycle1_1K_min_Cooling.dat

Set 2/ db-materials-heating_cooling_measurements-1

Heating - Fraunhofer_ISE_Octadecane_99p5_Sample2_Cycle2_1K_min_Heating.dat

Cooling - Fraunhofer_ISE_Octadecane_99p5_Sample2_Cycle2_1K_min_Cooling.dat