You are here: Home / PCM / Methyl Stearate (methyl octadecanoate) / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with TA Q200
By: Fraunhofer ISE
Additional Comments subtraction of blank crucible was not necessary (signal of blank measurement negligible)
  • Heating rate: 0.25 [K/min]
  • Cooling rate: 0.25 [K/min]
  • Sample mass: 10.11 [mg]
  • Heat of fusion: 207.0 [kJ/kg] - deviation: 0.4 [kJ/kg]
    • Integration range, lower limit: 26.0 [°C]
    • Integration range, upper limit: 40.0 [°C]
    • Onset temperature: 36.74 [°C] - deviation: 0.01 [°C]
    • Offset temperature: 38.73 [°C] - deviation: 0.02 [°C]
  • Crystallization enthalpy: 207.8 [kJ/kg] - deviation: 0.4 [kJ/kg]
    • Integration range, lower limit: 26.0 [°C]
    • Integration range, upper limit: 36.0 [°C]
    • Onset: 34.7 [°C] - deviation: 0.2 [°C]
    • Offset: 34.15 [°C] - deviation: 0.07 [°C]
Enthalpy (T)

Set 1/ db-materials-heating_cooling_measurements

Heating - Fraunhofer_ISE_Methylstearathe_Sample1_Cycle1_0K25_min_Heating.dat

Cooling - Fraunhofer_ISE_Methylstearathe_Sample1_Cycle1_0K25_min_Cooling.dat

Set 2/ db-materials-heating_cooling_measurements-1

Heating - Fraunhofer_ISE_Methylstearathe_Sample1_Cycle2_0K25_min_Heating.dat

Cooling - Fraunhofer_ISE_Methylstearathe_Sample1_Cycle2_0K25_min_Cooling.dat

Set 3/ db-materials-heating_cooling_measurements-2

Heating - Fraunhofer_ISE_Methylstearathe_Sample1_Cycle3_0K25_min_Heating.dat

Cooling - Fraunhofer_ISE_Methylstearathe_Sample1_Cycle3_0K25_min_Cooling.dat