You are here: Home / PCM / HDPE natur NT D960/6 / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with Mettler Toledo DSC 822e
By: University of Lleida
Additional Comments
  • Heating rate0.5 [K/min]
  • Cooling rate0.5 [K/min]
  • Sample mass26.13 [mg]
  • Heat of fusion203.3 [kJ/kg] - deviation0.4 [kJ/kg]
    • Integration range, lower limit110.0 [°C]
    • Integration range, upper limit135.0 [°C]
    • Onset temperature126.9 [°C] - deviation [°C]
    • Offset temperature [°C] - deviation [°C]
  • Crystallization enthalpy209.0 [kJ/kg] - deviation0.13 [kJ/kg]
    • Integration range, lower limit110.0 [°C]
    • Integration range, upper limit135.0 [°C]
    • Onset124.05 [°C] - deviation [°C]
    • Offset [°C] - deviation [°C]

Set 1/ db-materials-heating_cooling_measurements

Heating - HDPE_3_heating.txt

Cooling - HDPE_3_cooling.txt