You are here: Home / PCM / HDPE natur NT D960/6 / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with DSC Q200
By: Fraunhofer ISE
Additional Comments
  • Heating rate: 0.5 [K/min]
  • Cooling rate: 0.5 [K/min]
  • Sample mass: 12.26 [mg]
  • Heat of fusion: 215.4 [kJ/kg] - deviation: 0.6 [kJ/kg]
    • Integration range, lower limit: 85.0 [°C]
    • Integration range, upper limit: 135.0 [°C]
    • Onset temperature: 127.66 [°C] - deviation: 0.02 [°C]
    • Offset temperature: 133.5 [°C] - deviation: 0.01 [°C]
  • Crystallization enthalpy: 207.8 [kJ/kg] - deviation: 0.5 [kJ/kg]
    • Integration range, lower limit: 85.0 [°C]
    • Integration range, upper limit: 128.0 [°C]
    • Onset: 124.14 [°C] - deviation: 0.02 [°C]
    • Offset: 121.18 [°C] - deviation: 0.03 [°C]
Enthalpy (T)

Set 1/ db-materials-heating_cooling_measurements-3

Heating - HDPE_Fhg_ISE_Sample3_Heating1.txt

Cooling - HDPE_Fhg_ISE_Sample3_Cooling1.txt

Set 2/ db-materials-heating_cooling_measurements-4

Heating - HDPE_Fhg_ISE_Sample3_Heating2.txt

Cooling - HDPE_Fhg_ISE_Sample3_Cooling2.txt

Set 3/ db-materials-heating_cooling_measurements-5

Heating - HDPE_Fhg_ISE_Sample3_Heating3.txt

Cooling - HDPE_Fhg_ISE_Sample3_Cooling3.txt