You are here: Home / PCM / HDPE natur NT D960/6 / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with DSC Q200
By: Fraunhofer ISE
Additional Comments 0.5K/min, 60°C <-> 145°C, 5min Isotherm
  • Heating rate: 0.5 [K/min]
  • Cooling rate: 0.5 [K/min]
  • Sample mass: 12.68 [mg]
  • Heat of fusion: 230.0 [kJ/kg] - deviation: 1.0 [kJ/kg]
    • Integration range, lower limit: 85.0 [°C]
    • Integration range, upper limit: 135.0 [°C]
    • Onset temperature: 128.68 [°C] - deviation: 0.06 [°C]
    • Offset temperature: 134.12 [°C] - deviation: 0.0 [°C]
  • Crystallization enthalpy: 226.1 [kJ/kg] - deviation: 0.3 [kJ/kg]
    • Integration range, lower limit: 85.0 [°C]
    • Integration range, upper limit: 128.0 [°C]
    • Onset: 124.87 [°C] - deviation: 0.03 [°C]
    • Offset: 121.87 [°C] - deviation: 0.02 [°C]
Enthalpy (T)

Set 1/ db-materials-heating_cooling_measurements

Heating - HDPE_Fhg_ISE_Sample1_Heating1.txt

Cooling - HDPE_Fhg_ISE_Sample1_Cooling1.txt

Set 2/ db-materials-heating_cooling_measurements-1

Heating - HDPE_Fhg_ISE_Sample1_Heating2.txt

Cooling - HDPE_Fhg_ISE_Sample1_Cooling2.txt

Set 3/ db-materials-heating_cooling_measurements-2

Heating - HDPE_Fhg_ISE_Sample1_Heating3.txt

Cooling - HDPE_Fhg_ISE_Sample1_Cooling3.txt