You are here: Home / PCM / HDPE natur NT D960/6 (0,5 K/min) / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with DSC 200 F3 Maia
By: University Bayreuth
Additional Comments
  • Heating rate: 0.5 [K/min]
  • Cooling rate: 0.5 [K/min]
  • Sample mass: 8.61 [mg]
  • Heat of fusion: 208.8 [kJ/kg] - deviation: 0.9 [kJ/kg]
    • Integration range, lower limit: 95.0 [°C]
    • Integration range, upper limit: 135.0 [°C]
    • Onset temperature: 127.6 [°C] - deviation: 0.1 [°C]
    • Offset temperature: 133.4 [°C] - deviation: 0.1 [°C]
  • Crystallization enthalpy: 197.0 [kJ/kg] - deviation: 1.7 [kJ/kg]
    • Integration range, lower limit: 95.0 [°C]
    • Integration range, upper limit: 126.0 [°C]
    • Onset: 124.0 [°C] - deviation: 0.1 [°C]
    • Offset: 121.3 [°C] - deviation: 0.1 [°C]
Enthalpy (T)

Set 1/ db-materials-heating_cooling_measurements

Heating - Universitaet_Bayreuth_HDPE_Sample3_Cycle1_Heating.txt

Cooling - Universitaet_Bayreuth_HDPE_Sample3_Cycle1_Cooling.txt

Set 2/ db-materials-heating_cooling_measurements-1

Heating - Universitaet_Bayreuth_HDPE_Sample3_Cycle2_Heating.txt

Cooling - Universitaet_Bayreuth_HDPE_Sample3_Cycle2_Cooling.txt

Set 3/ db-materials-heating_cooling_measurements-2

Heating - Universitaet_Bayreuth_HDPE_Sample3_Cycle3_Heating.txt

Cooling - Universitaet_Bayreuth_HDPE_Sample3_Cycle3_Cooling.txt

Set 4/ db-materials-heating_cooling_measurements-3

Heating - Universitaet_Bayreuth_HDPE_Sample3_Cycle4_Heating.txt

Cooling - Universitaet_Bayreuth_HDPE_Sample3_Cycle4_Cooling.txt