You are here: Home / PCM / HDPE natur NT D960/6 (0,5 K/min) / Enthalpy (T)

Enthalpy (T)

Measurement details

Measured with DSC 200 F3 Maia
By: University Bayreuth
Additional Comments
  • Heating rate0.5 [K/min]
  • Cooling rate0.5 [K/min]
  • Sample mass8.68 [mg]
  • Heat of fusion211.0 [kJ/kg] - deviation7.0 [kJ/kg]
    • Integration range, lower limit95.0 [°C]
    • Integration range, upper limit135.0 [°C]
    • Onset temperature127.8 [°C] - deviation0.1 [°C]
    • Offset temperature133.6 [°C] - deviation0.1 [°C]
  • Crystallization enthalpy200.0 [kJ/kg] - deviation8.0 [kJ/kg]
    • Integration range, lower limit95.0 [°C]
    • Integration range, upper limit126.0 [°C]
    • Onset124.1 [°C] - deviation0.1 [°C]
    • Offset121.3 [°C] - deviation0.2 [°C]
Enthalpy (T)

Set 1/ db-materials-heating_cooling_measurements

Heating - Universitaet_Bayreuth_HDPE_Sample1_Cycle1_Heating.txt

Cooling - Universitaet_Bayreuth_HDPE_Sample1_Cycle1_Cooling.txt

Set 2/ db-materials-heating_cooling_measurements-1

Heating - Universitaet_Bayreuth_HDPE_Sample1_Cycle2_Heating.txt

Cooling - Universitaet_Bayreuth_HDPE_Sample1_Cycle2_Cooling.txt

Set 3/ db-materials-heating_cooling_measurements-2

Heating - Universitaet_Bayreuth_HDPE_Sample1_Cycle3_Heating.txt